I am trying to get gluetun setup with sab and deluge and it comes up with this error when trying to connect gluetun to mullvad.

I’ve confirmed that the private key and addresses are as per the .conf that gets downloaded from the mullvad set up page.

This is my compose.yml for the gluetun part

services:
  gluetun:
    image: qmcgaw/gluetun:latest
    container_name: gluetun
    cap_add:
      - NET_ADMIN
    environment:
      - VPN_SERVICE_PROVIDER=mullvad
      - VPN_TYPE=wireguard
      - WIREGUARD_PRIVATE_KEY=[redacted]
      - WIREGUARD_ADDRESSES=[redacted]
      - SERVER_COUNTRIES=Canada
    volumes:
      - ./gluetun/config:/gluetun
    ports:
      - "8112:8112"   # Deluge Web UI (exposed via gluetun)
      - "58846:58846" # Deluge daemon (optional)
      - "8019:8080"   # SABnzbd Web UI (exposed via gluetun)
      - "9090:9090"   # example SABnzbd additional port if needed
    restart: unless-stopped
    networks:
      - vpn-net

Anyone got any ideas? TIA :)

      • nelson@lemmy.worldEnglish
        2·
        4 months ago

        I have no clue as I’ve not set this up myself unfortunately. :(

        There are also certain Linux distros have SElinux enabled ( like red hat or fedora ). This could also block docker from accessing the file if it is enabled.

        You’d have to search online how to set a policy in selinux to allow it.

        SElinux does not appear in Ubuntu/Debian based distros.

        Easiest check would be to run getenforce. If it works and it returns 1 it’s enabled and possibly the culprit. You can try running your docker after running setenforce 0. This will temporarily disable it until a restart IIRC. You can enable it again by setting it to 1.

        I wouldn’t recommend disablint it permanently

      • skoell13@feddit.orgEnglish
        2·
        4 months ago

        Usually you should be able to download a wg0.conf file from your vpn provider. It basically contains all the data that you provided via env var in a specific format.

        Note: the server address has to be an IP address since gluetun won’t resolve addresses (see here).

              • skoell13@feddit.orgEnglish
                2·
                4 months ago

                This is my setup

                sabnzbd:
    ...
    restart: unless-stopped
    network_mode: "service:gluetun"

  gluetun:
    image: qmcgaw/gluetun
    container_name: gluetun
    cap_add:
      - NET_ADMIN
    environment:
      - VPN_SERVICE_PROVIDER=custom
      - VPN_TYPE=wireguard
    devices:
      - /dev/net/tun:/dev/net/tun
    ports:
      - 9090:8080 # SABnzbd webui port forwarding
    volumes:
      - ./Wireguard/wg0.conf:/gluetun/wireguard/wg0.conf:ro
    restart: unless-stopped

                Note how i explicitly tell sabnzbd container to use gluetun as a network.

                Afaik, with your setup you simply run both containers in the same network so that both can reach each other.