• 0 Posts
  • 11 Comments
Joined 1 year ago
cake
Cake day: July 19th, 2023

help-circle






  • Fubarberry@sopuli.xyzto3DPrinting@lemmy.worldSetting up a printer
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    12 days ago

    I had similar printing issues with some filaments, due to heat creep. The printing would start ok on mine, but after the printer had been running awhile it would print like that. In my case heat was travelling up the hot end and Bowden tube, which was causing printing issues after a certain amount of time had passed. Some filaments were more sensitive about this than others, my cheap plain filaments and my multicolor filaments wouldn’t print well, but medium to high quality plain filaments would print fine.

    There are a lot of things that can contribute to heat creep, I ended up replacing my hot end and Bowden tube, and lowered my print temperature some.

    220° is pretty high, I would try to figure out why it won’t print below that temperature and see what you can do to bring that down. See if that fixes it.