Taking advantage of the very real waterproofing of the phones I have owned (past and present), I will just wash the damn thing off under the kitchen tap if it gets dirty, which I have with one of my previous phones done with a high-pressure restaurant-sink-style spray nozzle (I was making beer, and boiling the wort kicks a lot of sticky crap into the air).
That phone was fine afterward, and continued to work for several years after.
Also at a more basic level, it is (at least in theory) an assurance that they actually tested the damn thing, and didn’t just slap a largely meaningless (and as already noted, “bigger number better”) rating on the thing, as is largely the style of our times because consumer protection is dead and regulations are meaningless.
This is exactly the kind of should be done properly, or just not at all. Test it and rate it for the people who do care, or STFU, put the unqualified but perfectly reasonable label of “water resistant” on it, and the bulk of people who indeed do not care (or will be confused) will be no worse off than they are now.
Yeah, ok, so… don’t wash your phone with a spray nozzle regardless, is going to be my advice. Wet tissue? Sure. Under the tap with light soap? If desperate. Just… don’t hose your phone down, what are you doing.
But let’s be clear, IP ratings are certifications. You can still be water resistant under the conditions of the test and not have the certification for it.
It makes perfect sense for… you know, people not using water jets on their electronics, to get just the certification that covers most real use cases (in this case the one that covers rain, accidental pool falls and the occasional toilet dunk) and communicate that. It doesn’t mean your phone won’t survive a bartop spray nozzle wash (which, again, you shouldn’t be doing) or even that it wouldn’t have gotten the IPx5/6 cert if the manufacturer had gone through the process, but it’s extra cost that will only muddle how you communicate with your user.
Are people not clear that IPx5/6 and IPx7/8 aren’t on a linear scale? They are not. That’s on the IEC’s poor formatting of the ratings. Are manufacturers leaning on the implicit user assumption that the higher number just means more protection? Sure.
Is it relevant/annoying/effectively problematic in real use? Not unless you’re using a waterjet cutter to rinse ketchup off your phone. Which, again, don’t do that, that’s not a good thing to do.
Yes and no.
Taking advantage of the very real waterproofing of the phones I have owned (past and present), I will just wash the damn thing off under the kitchen tap if it gets dirty, which I have with one of my previous phones done with a high-pressure restaurant-sink-style spray nozzle (I was making beer, and boiling the wort kicks a lot of sticky crap into the air).
That phone was fine afterward, and continued to work for several years after.
Also at a more basic level, it is (at least in theory) an assurance that they actually tested the damn thing, and didn’t just slap a largely meaningless (and as already noted, “bigger number better”) rating on the thing, as is largely the style of our times because consumer protection is dead and regulations are meaningless.
This is exactly the kind of should be done properly, or just not at all. Test it and rate it for the people who do care, or STFU, put the unqualified but perfectly reasonable label of “water resistant” on it, and the bulk of people who indeed do not care (or will be confused) will be no worse off than they are now.
Anything else is just annoying.
Yeah, ok, so… don’t wash your phone with a spray nozzle regardless, is going to be my advice. Wet tissue? Sure. Under the tap with light soap? If desperate. Just… don’t hose your phone down, what are you doing.
But let’s be clear, IP ratings are certifications. You can still be water resistant under the conditions of the test and not have the certification for it.
It makes perfect sense for… you know, people not using water jets on their electronics, to get just the certification that covers most real use cases (in this case the one that covers rain, accidental pool falls and the occasional toilet dunk) and communicate that. It doesn’t mean your phone won’t survive a bartop spray nozzle wash (which, again, you shouldn’t be doing) or even that it wouldn’t have gotten the IPx5/6 cert if the manufacturer had gone through the process, but it’s extra cost that will only muddle how you communicate with your user.
Are people not clear that IPx5/6 and IPx7/8 aren’t on a linear scale? They are not. That’s on the IEC’s poor formatting of the ratings. Are manufacturers leaning on the implicit user assumption that the higher number just means more protection? Sure.
Is it relevant/annoying/effectively problematic in real use? Not unless you’re using a waterjet cutter to rinse ketchup off your phone. Which, again, don’t do that, that’s not a good thing to do.