Looks like Bambu is getting more enshittified. I am so glad I didn’t let my recent frustration at my clumsiness with my Prusa steer me into Bambu-land.
I do hope this backfires on them considerably.
So I’m just not going to update mg firmware then? I’m already using lan only mkde, and if I have to start using an SD card I guess I can do that.
My A1 mini is 3 weeks old and I love it but this sucks… It always starts with “security” and i can totally see them going subscription model and locking you into their ecosystem. I guess that’s why it was so cheap and on sale haha. Sucks to see such an amazing product and success to go downhill so quickly…
Glad I didn’t pull the trigger on one of these. I have no idea what I would possibly need security for my printer from, this is there for them, not the user.
They’re trying hard to couch this as a security thing but I remain unconvinced that the “threats” they’re positing actually exist. Do you even leave your printer connected to the outside internet anyway? I sure as shit don’t.
The only person they’re locking out of your printer with this is you. This is to keep you walled within their own bullshit software ecosystem as much as possible, and the only possible benefit of that is so they can inflict further restrictions later, probably in the hopes of making the software side of their crap a subscription model so they can extort you for that sweet recurring revenue.
Their bambu filament has an RFID tag in it, presumably so you don’t have to tell the printer what kind of filament is loaded. I would bet big $$ that is going to be used to lock out third party filament at some point. Calling it here and now.
As evil as I think Bambu is, that would be suicide.
When I got my current printer I considered a Mini… thankfully it was too bulky to replace the MonoPrice Select Mini, and I ended up replacing that and the Ender 3 with a Sovol SV07 Plus. Looks like it was a lucky choice!
If you choose to upgrade to the firmware version with Authorization Features, you must download and install Bambu Connect (a printer control software) from the official website. After installation, you can export sliced .3mf files from OrcaSlicer and open them with Bambu Connect. This software allows you to send the files to your printer and monitor print progress.
It feels like an effort to start locking out third party tools (like any slicer other than Bambu Studio), but I’m sure it’s not going to stop there. For now, they’re making you slice it, export the 3mf project, import that to Bambu studio, then send it to the printer, which is likely to piss off a lot of people.
Ngl I’m just never going to update my firmware, unless they force push it without my input. My x1c works fine there’s nothing I can see them adding that I need anymore.
Luckily they have a procedure for enabling third party firmware, and the third party firmware (X1Plus) doesn’t have to include this crap.
They have it for now. I expect that procedure will be removed within 5 years.
I love my A1 mini, but if I ever move on to a bigger machine this will make me think twice about sticking with BambuLab.
This is exactly why I pre-ordered the Prusa Core ONE when it was announced for twice the price of anything Bambu has on hand and told both recent curious friends getting into printing to look elsewhere. Bambu was ALWAYS gonna go down this path, it was only a matter of time.
Open source or no sauce from me to this company.
It’s already happened with the Anycubic Kobra 2 Max - no way to connect directly, everything must go through their cloud to print, via their slicer only.
Good to know, that’s another one that won’t ever make the recommendation list then
I tell a lie. You can print from USB sticks, but not from a computer via USB.
Nothing swapping the main board out won’t fix
I didn’t know that was a thing…
A few months ago, BambuLab talked about this change.
This shouldn’t catch anybody by surprise.
Ugh, ive been eyeing them for a first printer but the back-asswards network stuff kept me away (seriously? No ethernet for a large stationary device?). Are there any printers like Bambu (ie, plug and Play) that arent internet-of-shit cloud-only abandonware?
Prusa!
If only their prices matched the quality and performance of their products. They are overpriced for the performance and quality you get in today’s market. The edge they once had on competitors has been completely lost.
While I fully support that comment, their cloud printing thing also is annoying - I’d rather they spend effort on proper lan printing.
On my mini I’m still using octoprint (even though I’ve added a network card), on my mk4s I’m using the local connection for uploading - but I got the GPIO board, so once I have time that should enable me to get better monitoring working again. But it all still feels kludgy - something like enabling octoprint control via network instead of USB for the mk4 would be way nicer.
Ooh, that XL is certainly interesting. The main thing i want to design/print would be custom tool trays, so fairly shallow objects but wider and longer than the average 3d printers ive seen will handle. Things roughly laptop sized i can easily slide into my backpack
If you have time to be a little bit patient, they just announced their new core XY design printer due out in the next few months.
He mentioned ethernet though. Do not believe this will have that either.
The XL does appear to have ethernet. The guide for networking it also has ethernet instructions
Interesting, my Mk4 has wired ethernet
Did you add something? Mine doesnt
If you are talking about the Core One, here is the connectivity of it from the Prusa website:
“Prusa CORE One is equipped with a LAN port and a detachable Wi-Fi module (Wi-Fi can be set up a with an NFC tap). It integrates seamlessly with both Prusa Connect and Prusa App, so you always have a complete overview of your printer. However, the printer can be operated in a full offline mode without any compromise. You can even flash the firmware from a USB drive.”
https://www.prusa3d.com/product/prusa-core-one/
I love my Prusa printers, but I am not a “fanboy” from the standpoint of shitting on any other printer that is not a Prusa. It’s just that I like them and keep buying them.
I think Bambu printers bring a lot of features to users at a really low price compared to any other manufacturer.
Prusa Connect and Prusa App
Are these both open source too?
They are not but Prusa Link is, which is their local version of Prusa Connect: https://github.com/prusa3d/Prusa-Link-Web
I’m honestly not sure if they are or not, but neither are necessary. You can go straight to the IP address of your printer and manage it from the lan.
Love my Prusa XL. Bought the single head and have been having fun with it. Bought a second head for my Christmas present and have been playing with two color prints.
Printed some colorful lizards for my mom.
Qidi.
I’ve owned two and they’ve been very nearly completely turn-key (the OG X-Plus) and absolutely completely turn-key (my current X-Max 3). Their bigger machines are fully enclosed and have active chamber heaters to manage pain in the ass materials like ABS and ASA, and even polycarbonate.
They have their “own” slicer but it’s just a mildly breathed upon fork of Prusaslicer with built in presents and which has all the plugins for remotely administering their machines already included. You can use stock Prusaslicer, Cura, or Orca with them if you prefer. The boards just run Klipper. You have terminal access, and you can hack the machine however you want if that’s your jam.
Their upcoming gen 4 machines promise compatibility with an AMS-like “Qidi box” filament exchanger system, although the details of that remain unspecified at the moment. If you want multimaterial now they have a true dual extruder model also.
As of yet, there’s no lockdown, no cloud bullshit (to be fair they do now have some kind of cloud bullshit platform available, but it’s entirely optional and I’ve never touched it or even bothered to look at it), nothing proprietary, and so far there have been no rug-pulls on any of the above.
I’m very interested in that, since it has Klipper. Looks comparable to the Bambu and with the heated chamber for ABS, that’s a win. I have no need for multicolor printing, I’m definitely going to put this on the list.
Thanks.
