To me, someone who celebrates a bit more of the spectrum than most: Metal hot. Make food hot.
Non-stick means easier cleanup, but my wife seems to think cast-iron is necessary for certain things (searing a prime rib roast, for example.).
After I figure those out, then I gotta figure out gas vs. electric vs. induction vs infrared…
FYI, you can wash cast iron with soap.
Not using soap is a hold over from when soaps were more caustic (e.g. lye soap).
Only if you re-season it afterwards. Otherwise it starts to rust because the seasoning is what protects it from oxidation
Really not. See the lye comments.
I generally wash with dish soap and a chainmail scrubber, then dry with a paper towel. If I remember I might spread a tiny amount of oil.
Yeah I could do better but the point is I’ve done almost nothing to care for them in years.
Pure iron oxidizes without the high carbon content to make it stainless and will absolutely rust if you don’t at least oil it after washing with soap, but seasoning it properly definitely makes a difference in how it cooks.
I own 4 different size/shape cast iron and I speak from experience. Any decent dish soap will still strip the oils that are acting as a barrier to the open air and oxidation, doesn’t have to be lye-based
Stainless steel is made with chromium, not carbon.
Carbon steel makes good knives, but will definitely rust.
Cast iron is extremely forgiving of improper treatment. And even if it eventually rusts, you can fix it. I’ve been using cast iron as my primary skillets since pandemic. I know I don’t treat them like I should, but they’re not yet rusted, still have an easy to clean surface that food doesn’t stick to. I’ll probably have to reseason eventually but if that’s not until I’d normally have to replace non-stick, I’m way ahead without putting in any extra work
Edit: sure, standard three cast iron skillets, and cast iron Dutch oven. I also have a set of stainless pans, and some induction ready non-stick for company
It only oxidizes when water can reach the iron. If you have a good seasoning on it, mild dish soap can’t lift it off, and water can’t reach the iron.
Making sure it’s completely dry (I dry mine with heat on the stove) and adding a thin layer of oil is a good idea too. There are often parts of the pan that aren’t well seasoned. On mine, it’s the part that touches the stove that’s most likely to rust.
If your seasoning rinses off with mild soap and water, you might want to try some different seasoning methods. That might mean using a different oil, different temperature, longer heat time for the seasoning, etc. Or you might want to season it with thinner layers of oil multiple times in a row.
Thanks for the tip. I saw many people saying both sides, so I figured I’d just avoid soap and not find out for myself.
If you wash your cast iron with eg Dawn dish soap, you can definitely clean it down to bare metal and it will rust. I usually will clean the cast iron pan last and use the sponge that just has a small amount of soap left in it. Just watch it as you clean, if the shiny hard coating seems to be going away, rinse out the soap and make something greasy next time you use the pan to replenish it.
If you have a good seasoning, it won’t wash off. “Seasoning” is the process of polymerizing oil. That hardens the oil and binds it to the surface. You’re more likely to burn the seasoning off or to scratch the seasoning and have it flake off than take it off with dish soap.
Whether you use soap or not, dry it on the stove and give it a light coat of oil after you clean it.
Thank you for helping to dispel this myth. It is truly disgusting the state that some people leave their cast iron pans in, the fact that people eat the food from them after not having washed it for years is terrifying.
The pans regularly get above boiling temperatures. They’re sterile
Sterile and clean aren’t the same thing.
Then wipe it with a paper towel when it’s cool like a normal person